Skip to content

Glue – E6000 (110ml)

July 11, 2011
E-6000 Glue is very popular among crafters due to its superb adhesion to almost any kind of surface and material, glass, leather, PVC, wood, ceramics etc. Not for use on styrofoam. Other than that, it was tested and worked perfectly on beads (including swarovski beads) , plastic, rubber, vinyl, toys, buttons, household items, and almost anything. Super resistant. It dries clear – a must-have item for crafters. Use in well ventilated area only.
Gam E-6000 ini popular dikalangan crafters kerana ia sesuai digunakan untuk semua jenis permukaan seperti kaca, plastik, seramik, kayu, PVC, kulit, getah, mainan, barangan rumah, manik2 sulaman, butang dan sebagainya. Tidak sesuai digunakan untuk styrofoam. Sangat tahan lasak. Lutsinar tanpa warna (tidak meninggalkan kesan jelik warna gam). Elakkan penggunaan di tempat tertutup/ kurang pengudaraan. 
Glue – E6000 (110ml)
Price: RM35 
(Retail at RM35 to RM39.90)
Special Promotion from CintaHati Craft, Buy 2 for only RM65! 
(Limited Time Promotion)


HOW TO USE

Follow these step-by-step directions when using
E-6000® Series of Industrial Strength Adhesives:

Read all instructions before using.
  • Make sure surfaces are clean, dry and free of dirt. Roughen surface for optimum adhesion.
  • Cut cartridge tip to desired size at a 45° angle, and puncture foil seal with nail.
  • Apply E-6000 directly to each surface to be bonded or repaired. Bring surfaces together.
  • For maximum strength bond, allow to dry for 24 to 72 hours.
  • Clean uncured adhesive with acetone or naphtha sparingly. The adhesive will ball up
    and brush off. Cured material may be removed by cutting or scraping.
  • Store unused E-6000 adhesive in a dry area at room temperature.
Curing
E-6000 Series Industrial Strength Adhesives will grab within 4 minutes and cures within 24 to 72 hours depending upon temperature and thickness. Lower temperatures prolong cure time. Higher temperatures accelerate cure time.
Cleanup
Clean uncured adhesive with acetone or naphtha sparingly. Cured material may be removed by sanding with a dustless sander.
Storage
Store unused E-6000 Series Industrial Strength Adhesives in a dry area at room temperature.
No comments yet

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: